How Do I Fix AboCom On My Network?

Posted by

There are a lot of devices on the network that you can see. Some of our guys like to tinker about with stuff, and with these new routers, you can check what devices are linked to your router and Wi-Fi network.

Not only that, but you can also view which of the devices linked to the network are receiving how much internet speed, bandwidth, and other information.

I Have AboCom On My Network

You can alter the name of various devices, such as your phone or the laptop you’re using, according to your preferences. However, some devices just display their name, which is not editable, and you may occasionally see something like an “unknown device” linked to your Wi-Fi network.

Several customers have reported seeing the AboCom device linked to their Wi-Fi network and claiming that they are unfamiliar with it. It could be caused by confusion or a variety of other factors, so here are a few things to keep in mind:

Devices From AboCom

AboCom is a networking equipment manufacturer and a communication firm. So, most of the time, you’re seeing a gadget that you own and using it without recognizing that the Wi-Fi module put on that device was designed by AboCom.

A variety of brands use AboCom’s Wi-Fi connectivity modules. They are particularly sought after for smart home products including lighting, bulbs, and thermostats.

So, if you have lately installed any smart home gadget that isn’t from a well-known brand, there’s a good chance that AboCom will be the name that appears.

So, most of the time, you won’t have to worry about it because you can easily rule it out, and here are a few things you can do to see which device is listed as AboCom on your network.


This is the oldest trick in the book for excluding a possibility, and it’s also rather straightforward to do.

There isn’t much to be concerned about if there are only a few devices linked to the network, but if there are many. It can be problematic, as it eliminates the potential of identifying a specific device, which is like finding a needle in a haystack. So, to solve this problem, you can use your router’s block option.

Most current routers include this feature, which allows you to use the MAC Address to prevent any unwanted devices from joining your network. This way, when you’ve unplugged a device from the network, you’ll be able to identify which of your devices has lost internet connectivity.

If you can locate a device that has been detached from the network as a result of blocking a certain MAC Address, you will be able to locate the device and allow it to reconnect. And if you are unable to notice any of your devices that may have become disconnected as a result of the blocking, you have nothing to lose and can leave it alone.

Look Up The MAC Address On Google.

However, if you don’t want your devices to be disconnected, especially your smart home appliances, which are notoriously difficult to set up. There is a simple solution that will get you out of even the most difficult situations. In such circumstances, all you have to do is make sure you’re getting the MAC address of the AboCom device on your router and then Google it.

The majority of the time, Google will tell you the device’s maker and name. This will assist you to figure out which gadget you’re using, and if you can recognize it, you’re good to go.

Otherwise, you can simply disconnect the device from your network, leaving you worry-free.

Leave a Reply

Your email address will not be published. Required fields are marked *